ELOGIND-INHIBIT(1)

NAME
elogind-inhibit - Execute a program with an inhibition lock taken

SYNOPSIS

elogind-inhibit [OPTIONS...] [COMMAND] [ARGUMENTS...]

elogind-inhibit [OPTIONS...] --list

DESCRIPTION

elogind-inhibit may be used to execute a program with a shutdown, sleep, or idle inhibitor lock taken. The lock will be acquired before the specified command line is executed and released afterwards.

Inhibitor locks may be used to block or delay system sleep and shutdown requests from the user, as well as automatic idle handling of the OS. This is useful to avoid system suspends while an optical disc is being recorded, or similar operations that should not be interrupted.

For more information see the Inhibitor Lock Developer Documentation[1].

OPTIONS

The following options are understood:

--what=
    Takes a colon-separated list of one or more operations to inhibit: "shutdown", "sleep", "idle", "handle-power-key", "handle-suspend-key", "handle-hibernate-key", "handle-lid-switch", for inhibiting reboot/power-off/halt/kexec/soft-reboot, suspending/hibernating, the automatic idle detection, or the low-level handling of the power/sleep key and the lid switch, respectively. If omitted, defaults to "idle:sleep:shutdown".

--who=
    Takes a short, human-readable descriptive string for the program taking the lock. If not passed, defaults to the command line string.

--why=
    Takes a short, human-readable descriptive string for the reason for taking the lock. Defaults to "Unknown reason".

--mode=
    Takes either "block" or "delay" and describes how the lock is applied. If "block" is used (the default), the lock prohibits any of the requested operations without time limit, and only privileged users may override it. If "delay" is used, the lock can only delay the requested operations for a limited time. If the time elapses, the lock is ignored and the operation executed. The time limit may be specified in logind.conf(5). Note that "delay" is only available for "sleep" and "shutdown".

--list
    Lists all active inhibition locks instead of acquiring one.

--no-pager
    Do not pipe output into a pager.

--no-legend
    Do not print the legend, i.e. column headers and the footer with hints.

-h, --help
    Print a short help text and exit.

--version
    Print a short version string and exit.

EXIT STATUS

Returns the exit status of the executed program.

EXAMPLE

    # elogind-inhibit wodim foobar.iso

This burns the ISO image foobar.iso on a CD using wodim(1), and inhibits system sleeping, shutdown and idle while doing so.

ENVIRONMENT

$SYSTEMD_LOG_LEVEL
    The maximum log level of emitted messages (messages with a higher log level, i.e. less important ones, will be suppressed). Either one of (in order of decreasing importance) emerg, alert, crit, err, warning, notice, info, debug, or an integer in the range 0...7. See syslog(3) for more information.

$SYSTEMD_LOG_COLOR
    A boolean. If true, messages written to the tty will be colored according to priority.

    This setting is only useful when messages are written directly to the terminal, because journalctl(1) and other tools that display logs will color messages based on the log level on their own.

$SYSTEMD_LOG_TIME
    A boolean. If true, console log messages will be prefixed with a timestamp.

    This setting is only useful when messages are written directly to the terminal or a file, because journalctl(1) and other tools that display logs will attach timestamps based on the entry metadata on their own.

$SYSTEMD_LOG_LOCATION
    A boolean. If true, messages will be prefixed with a filename and line number in the source code where the message originates.

    Note that the log location is often attached as metadata to journal entries anyway. Including it directly in the message text can nevertheless be convenient when debugging programs.

$SYSTEMD_LOG_TID
    A boolean. If true, messages will be prefixed with the current numerical thread ID (TID).

    Note that the this information is attached as metadata to journal entries anyway. Including it directly in the message text can nevertheless be convenient when debugging programs.

$SYSTEMD_LOG_TARGET
    The destination for log messages. One of console (log to the attached tty), console-prefixed (log to the attached tty but with prefixes encoding the log level and "facility", see syslog(3), kmsg (log to the kernel circular log buffer), journal (log to the journal), journal-or-kmsg (log to the journal if available, and to kmsg otherwise), auto (determine the appropriate log target automatically, the default), null (disable log output).

$SYSTEMD_LOG_RATELIMIT_KMSG
    Whether to ratelimit kmsg or not. Takes a boolean. Defaults to "true". If disabled, elogind will not ratelimit messages written to kmsg.

$SYSTEMD_PAGER
    Pager to use when --no-pager is not given; overrides $PAGER. If neither $SYSTEMD_PAGER nor $PAGER are set, a set of well-known pager implementations are tried in turn, including less(1) and more(1), until one is found. If no pager implementation is discovered no pager is invoked. Setting this environment variable to an empty string or the value "cat" is equivalent to passing --no-pager.

    Note: if $SYSTEMD_PAGERSECURE is not set, $SYSTEMD_PAGER (as well as $PAGER) will be silently ignored.

$SYSTEMD_LESS
    Override the options passed to less (by default "FRSXMK").

    Users might want to change two options in particular:

    K
        This option instructs the pager to exit immediately when Ctrl+C is pressed. To allow less to handle Ctrl+C itself to switch back to the pager command prompt, unset this option.

        If the value of $SYSTEMD_LESS does not include "K", and the pager that is invoked is less, Ctrl+C will be ignored by the executable, and needs to be handled by the pager.

    X
        This option instructs the pager to not send termcap initialization and deinitialization strings to the terminal. It is set by default to allow command output to remain visible in the terminal even after the pager exits. Nevertheless, this prevents some pager functionality from working, in particular paged output cannot be scrolled with the mouse.

    Note that setting the regular $LESS environment variable has no effect for less invocations by elogind tools.

    See less(1) for more discussion.

$SYSTEMD_LESSCHARSET
    Override the charset passed to less (by default "utf-8", if the invoking terminal is determined to be UTF-8 compatible).

    Note that setting the regular $LESSCHARSET environment variable has no effect for less invocations by elogind tools.

$SYSTEMD_PAGERSECURE
    Takes a boolean argument. When true, the "secure" mode of the pager is enabled; if false, disabled. If $SYSTEMD_PAGERSECURE is not set at all, secure mode is enabled if the effective UID is not the same as the owner of the login session, see geteuid(2) and sd_pid_get_owner_uid(3). In secure mode, LESSSECURE=1 will be set when invoking the pager, and the pager shall disable commands that open or create new files or start new subprocesses. When $SYSTEMD_PAGERSECURE is not set at all, pagers which are not known to implement secure mode will not be used. (Currently only less(1) implements secure mode.)

    Note: when commands are invoked with elevated privileges, for example under sudo(8) or pkexec(1), care must be taken to ensure that unintended interactive features are not enabled. "Secure" mode for the pager may be enabled automatically as describe above. Setting SYSTEMD_PAGERSECURE=0 or not removing it from the inherited environment allows the user to invoke arbitrary commands. Note that if the $SYSTEMD_PAGER or $PAGER variables are to be honoured, $SYSTEMD_PAGERSECURE must be set too. It might be reasonable to completely disable the pager using --no-pager instead.

$SYSTEMD_COLORS
    Takes a boolean argument. When true, systemd and related utilities will use colors in their output, otherwise the output will be monochrome. Additionally, the variable can take one of the following special values: "16", "256" to restrict the use of colors to the base 16 or 256 ANSI colors, respectively. This can be specified to override the automatic decision based on $TERM and what the console is connected to.

$SYSTEMD_URLIFY
    The value must be a boolean. Controls whether clickable links should be generated in the output for terminal emulators supporting this. This can be specified to override the decision that systemd makes based on $TERM and other conditions.

SEE ALSO

elogind(8), logind.conf(5)

NOTES

1.  Inhibitor Lock Developer Documentation
    https://www.freedesktop.org/wiki/Software/systemd/inhibit