/*	$Id: pmon_target.h,v 1.2 2002/11/07 12:23:39 pefo Exp $ */

/*
 * Copyright (c) 2002 Opsycon AB  (www.opsycon.se)
 * 
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *	This product includes software developed by
 *	Opsycon Open System Consulting AB, Sweden.
 * 4. The name of the author may not be used to endorse or promote products
 *    derived from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
 * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 */

#include <target/db64360.h>
#include <pmon/dev/mv64360reg.h>

/*
 *  Select some features.
 */
#define	HAS_LOGO


#if defined(DSR) || !defined(SBD_DEBUG)
#define SBD_DISPLAY(text, code)		/* No display function */
#else
extern void tgt_display __P((char *, int));
#define SBD_DISPLAY(text, code)	tgt_display(text, code)
#endif

/*
 *  Default cache parameters. Code places data correctly in register.
 */
#if 1
#define	PPC_CACHE_L2RAM	0x02		/* Sync burst */
#else
#define	PPC_CACHE_L2RAM	0x00		/* Flow-trough */
#define	PPC_CACHE_L2RAM	0x03		/* Sync burst late write */
#endif
#define	PPC_CACHE_L2PE	0x01		/* Parity enable: ON  */
#define	PPC_CACHE_L2DO	0x00		/* Data only L2:  OFF */
#define	PPC_CACHE_L2WT	0x00		/* Write through: OFF */
#define	PPC_CACHE_L2CE	0x00		/* Checkstop enable (750cx) */

#define	PPC_CACHE_SPEED		166666000

/*
 *  Stack and SMP trap code support
 *
 * XXX this is OK for a dual processor system.
 * more generic approach may be needed though.
 *
 *  Low 16K mem layout:
 *
 *  0x00000000 ->		Trap vectors.
 *  0x00003000 - 0x00003fff	Reserved.
 *  0x00004000 - 0x00005fff	Reserved.
 *  0x00006000 - 0x00007fff	Interrupt stack, currently not used.
 *  0x00008000 - 0x0000bfff	CPU 1 Info and stack.
 *  0x0000c000 - 0x0000ffff	CPU 2 info and stack.
 */

#define STACKBASE	0x000008000
#define STACKSIZE	0x000004000

#define CPUINFOADDR(reg)		\
	mfsprg	reg, 0

#define CPUSTACKADDR(reg)		\
	mfsprg	reg, 0;			\
	addi	reg, reg, STACKSIZE


/*
 *  Name of envvar that has to be set to enable expert mode.
 */
#define EXPERT  "marvellexpert"

/*
 *  Name of envvar that has to be set to enable extend mode.
 */
#define CMDEXT  "cmdextend"

/*
 *  Boot loader parameters.
 */

#define	TGT_BOOT_ADR	0x00400000	/* Load 4 meg up. */
#define	TGT_BOOT_SIZ	0x00004000	/* Suck in 16k */
#define	TGT_BOOT_OFF	0x00000400	/* Start reading from byte 1024 */